how-to

7 Steps to Track Job Costing for Trades

Editorial Team·11 min read·
7 Steps to Track Job Costing for Trades

Last Updated: October 26, 2026

Quick Summary

To track job costing for trades, set up cost categories and codes, capture all direct costs by job including materials and labor, calculate labor burden, assign overhead to each project, and review actual costs against your budget regularly. This process shows you the true profit on every job and helps you bid future work accurately.

  • Start by defining cost categories like materials, labor, subcontractors, equipment rental, permits, and other direct costs, then assign cost codes to each.
  • Track labor hours daily by job with date, job name, hours worked, and hourly rate to capture your biggest expense accurately.
  • Calculate labor burden by adding payroll taxes, workers comp, health insurance, and benefits, then divide by total annual wages to get a percentage.
  • Assign overhead to jobs by dividing total annual indirect costs by total annual direct labor costs to determine your overhead rate.
  • Review job costs weekly for jobs in progress, monthly for completed jobs, and quarterly for trends to improve bidding and identify inefficiencies.

Table of Contents

Why Job Costing Matters for Your Trades Business

Job costing is the process of tracking every cost that goes into a specific project so you know exactly what it costs to complete and how much profit you made.

Without job costing, you're flying blind, you might think a plumbing job was profitable when it lost money, underbid future jobs, or miss that one crew is wasting materials.

At Checkpoint Bookkeeping, we help trades businesses understand their real job costs.

Job costing fixes both.

Step 1: Set Up Your Cost Categories and Cost Codes

Before you can track costs, you need a system.

Most trades businesses use these core categories:

  • Materials and supplies, Everything you buy for the job (pipe, wire, lumber, fasteners, paint)
  • Labor, Wages for your crew and any field time
  • Subcontractor fees, What you pay other trades to do work you don't do in-house
  • Equipment rental, Temporary tools or machinery you rent for a specific job
  • Permits and licenses, Project-specific permits, inspections, or fees
  • Other direct costs, Travel, dumping fees, cleanup, anything else tied to that job

Next, assign cost codes to each category, a short number or abbreviation that identifies the type of expense, speeding data entry and reducing mistakes.

Example cost codes:

  • 100 = Materials
  • 200 = Labor
  • 300 = Subcontractors
  • 400 = Equipment rental
  • 500 = Permits
  • 600 = Other direct costs

When your crew buys materials or logs hours, they use the cost code to categorize the expense.

The key is consistency. Use the same codes across all jobs and train your team on what each means.

Step 2: Capture Direct Costs on Every Job

Direct costs are expenses that belong to a single job. They wouldn't exist if that job didn't exist. Capturing them accurately is where most trades businesses fail.

Contractor photographing a material receipt to track job costing on a busy construction site
Contractor photographing a material receipt to track job costing on a busy construction site

Materials and Supplies

Every material that goes into the job is a direct cost. Track it from purchase to installation.

Create a simple process:

  1. When you buy materials, save the receipt and note the job name and cost code
  2. Enter the receipt into your system (spreadsheet, accounting software, or job costing tool)
  3. When materials arrive at the job site, verify the quantity matches the receipt
  4. If materials are left over, note that too, it affects your actual cost

Many trades businesses buy in bulk and use materials across jobs, so track which job got what.

This is where a job costing spreadsheet template helps. You list materials by job, quantity, unit cost, and total. Update it as materials arrive and get used.

Labor Hours and Wages

Labor is usually the biggest cost on any job. Tracking it accurately is critical.

Set up a simple time-tracking system. Each crew member logs their hours by job, every day. Include:

  • Date
  • Job name or job number
  • Hours worked
  • Hourly rate or wage
  • Total labor cost for that day

If one crew member works on two jobs in a single day, split the hours between them. If they work 4 hours on Job A and 3 hours on Job B, log both separately.

At week's end, total labor hours and costs by job to see how much labor each job consumed, whether it ran longer than estimated, or if one crew is faster than another.

Many contractors skip this and estimate labor after the fact. That's a mistake, actual hours always differ from estimates, and you need real data to improve bidding and see where labor goes.

Subcontractor Fees and Equipment Rental

When you hire a subcontractor for part of a job, that's a direct cost.

For subcontractors, get an invoice showing the job name, work done, and total cost, and file it with your job records.

For equipment rental, keep the agreement and invoice noting the job name and dates.

Track these the same way you track materials: by job, in your spreadsheet or software.

Step 3: How to Calculate Labor Burden for Contractors

Here's the formula:

Track Your Numbers for Contractors [Job Costing Calculator]

Liz Chism | Marketing & Systems for Contractors

Labor Burden = (Payroll Taxes + Workers' Comp Insurance + Health Insurance + Other Benefits) ÷ Total Annual Wages

Example:

  • Crew member's annual wage: $50,000
  • Payroll taxes (FICA): $3,825
  • Workers' comp insurance: $2,000
  • Health insurance: $4,000
  • Total burden: $9,825
  • Labor burden percentage: $9,825 ÷ $50,000 = 19.65%

This crew member's true cost isn't $50,000, it's $59,825. When you bill for their time, account for that extra cost.

Apply the labor burden percentage to every hour they work.

When you track job costing, include labor burden in your actual costs to see real profit per job.

Calculate labor burden annually, payroll taxes and insurance change year to year, so update your percentage once a year.

Step 4: Assign Indirect Costs and Overhead to Jobs

You need to assign a portion of overhead to each job.

Here's how:

Step 1: Calculate total annual overhead

Book a Free Call →

Add up all indirect costs for the year:

  • Office rent
  • Vehicle insurance and maintenance
  • Office utilities and supplies
  • Management salaries
  • Accounting and legal fees
  • Marketing
  • Equipment depreciation

Let's say your total overhead is $120,000 per year.

Step 2: Choose an allocation method

Calculate your overhead rate:

Overhead Rate = Total Annual Overhead ÷ Total Annual Direct Labor Costs

Example:

  • Total overhead: $120,000
  • Total annual direct labor costs: $400,000
  • Overhead rate: $120,000 ÷ $400,000 = 0.30 (or 30%)

This means for every dollar of labor on a job, you assign $0.30 of overhead.

Step 3: Apply overhead to each job

When you complete a job, multiply the direct labor cost by your overhead rate.

Example:

  • Job A direct labor: $5,000
  • Overhead assigned: $5,000 × 0.30 = $1,500
  • Total job cost including overhead: $6,500

This shows the true cost of the job, including your share of office operations.

Review your overhead rate annually. If your overhead changes significantly, recalculate.

Step 5: Build or Use a Contractor Job Costing Spreadsheet Template

A simple spreadsheet is often the best starting point for job costing. It's flexible, you control it, and you can see all your data in one place.

Create a spreadsheet with these columns:

Column What It Shows
Job Name/Number Identifier for the project
Description Type of work (plumbing repair, HVAC install, etc.)
Start Date When work began
Completion Date When work finished
Materials Cost Total materials used on the job
Labor Hours Total hours worked
Labor Cost (with burden) Hours × hourly rate × (1 + burden %)
Subcontractor Cost Fees paid to other trades
Equipment Rental Cost to rent tools or machinery
Permits/Other Permits, inspections, travel, cleanup
Total Direct Costs Sum of all costs above
Overhead Allocation Direct labor × overhead rate
Total Job Cost Direct costs + overhead
Job Revenue What you charged the customer
Gross Profit Revenue − total job cost
Profit Margin % Gross profit ÷ revenue

Update this spreadsheet weekly or as costs come in.

The spreadsheet shows you which jobs are profitable and which ones aren't.

Use this data to improve your bids. If you've underbid a type of job in the past, you now know it and can adjust future quotes.

Step 6: Choose the Best Job Costing Software for Trades

As your business grows, a spreadsheet becomes hard to manage.

When choosing software, look for these features:

  • Mobile time tracking, Crew can log hours and costs from the job site
  • Receipt capture, Upload photos of receipts directly into jobs
  • Cost categories, Organize expenses by material, labor, subcontractor, etc.
  • Real-time reporting, See costs and profit margins as they happen
  • Integration with accounting, Costs flow into your general ledger automatically
  • Multi-job tracking, Manage dozens of projects at once
  • Offline access, Works even without internet on the job site

Most job costing software integrates with accounting tools, which saves time on data entry and reduces errors.

The cost of software varies. Some charge per user, some per job, some a flat monthly fee.

Before committing to software, make sure it works with your existing accounting system. Checkpoint Bookkeeping offers simple, flat-rate pricing for bookkeeping services that can handle job costing implementation and management.

Consider scheduling a consultation to discuss job costing setup and software options for your specific business. Book a call today to discuss your job costing needs with our team.

Alternatively, Checkpoint Bookkeeping's services can handle job costing implementation and ongoing management, so you don't have to learn the software yourself.

Step 7: Review Job Costs and Compare to Project Budget

Once costs are tracked, review them regularly. Compare actual costs to your original estimate. This is where you learn and improve.

Weekly review:

  • Look at jobs in progress
  • Check if costs are tracking close to budget
  • Flag jobs that are over budget early
  • Talk to the crew about what's causing overages

Monthly review:

  • Analyze completed jobs
  • Calculate profit margin on each
  • Compare labor hours to estimates
  • Identify which types of jobs are most profitable
  • Note any patterns (certain crews, seasons, job types)

Quarterly review:

  • Look at trends across all jobs
  • See if profitability is improving or declining
  • Adjust your overhead rate if needed
  • Review your bidding accuracy

This review process is where job costing pays off. You spot problems before they become expensive.

How to Calculate Profit Margins for Electrical Contractors shows how to use job costing data to calculate and optimize profit margins, the natural next step after tracking costs.

7 Benefits of Monthly Financial Reporting for Contractors explains how regular financial reporting helps you review and act on job costing data.


Job costing isn't complicated, but it does require discipline. Start with cost categories and codes. Capture every direct cost on every job.

Frequently Asked Questions

What is the difference between direct and indirect costs in job costing?

Direct costs are expenses tied to a specific job: materials, labor hours for that project, subcontractor fees, and equipment rental. Indirect costs (overhead) support all jobs but are not tied to one project, office rent, insurance, vehicle maintenance, and administrative salaries. When you track job costing, you assign direct costs to individual jobs to calculate true profitability, then allocate a portion of overhead to each job based on labor hours or revenue.

How do you calculate job order costs for trade projects?

Add all direct costs assigned to the job: materials purchased, labor hours worked multiplied by wage rates plus labor burden, subcontractor invoices, equipment rental, and permits. Then allocate a share of overhead based on your chosen method (hours worked, revenue percentage, or square footage). The total is your job order cost. Compare it to the estimated cost and final invoice to measure profit margin and identify where estimates are accurate or off.

How often should trade businesses review their job costing reports?

Review job costs weekly during active projects to catch cost overruns early, and at project closeout to calculate final profit margin and compare actual costs to estimates. Monthly reviews of all active jobs help you spot trends in labor efficiency, material waste, or subcontractor pricing. Use this data to refine future estimates and improve profitability across your trades business.

What are the common mistakes to avoid when tracking job costs?

Mixing personal and business expenses, failing to capture all labor hours in the field, not allocating overhead consistently across jobs, missing small material purchases or supply costs, delaying cost entry until months later (memory fades), and not comparing actual costs to estimates at project closeout. Avoid these by assigning a cost code to every transaction, capturing field time daily, using a consistent overhead allocation method, and reviewing job profitability within days of completion.

GoogleAdd checkpointnh.com as a preferred source on Google →