How to Set Up a Chart of Accounts for Contractors

Last Updated: November 8, 2026
Quick Summary
Set up a chart of accounts for contractors by grouping every account into five categories (assets, liabilities, equity, income, expenses) and numbering them in ranges: 1000s for assets, 2000s for liabilities, 3000s for equity, 4000s for income, 5000s for direct costs, and 6000s to 8000s for overhead. Split direct job costs from overhead and give retainage receivable and work in progress their own lines so you can see profit per job.
- Retainage receivable needs its own line because held-back money is not cash yet.
- Direct costs belong to a job while overhead covers rent, office payroll, insurance, and software.
- Leave gaps in your number ranges so you can add accounts later without renumbering.
- Enable Classes and Locations in QuickBooks before you build accounts, since switching later means re-tagging.
- Do the migration cutover at a month end and tie opening balances to a closed period.
Table of Contents
- Why Contractors Need a Construction-Specific Chart of Accounts
- The Five Account Categories Every Contractor Chart Must Cover
- Contractor Job Costing Accounts: Separating Direct Costs From Overhead
- A Construction Chart of Accounts Template With Real Account Numbers
- Setting Up a Chart of Accounts for Contractors: Example Setup and Migration Steps
- QuickBooks Chart of Accounts for Contractors: Setup Tips and Limits
- Common Chart of Accounts Mistakes Contractors Make
- Hand Off Your Chart of Accounts to a Bookkeeper Who Knows Trades
- Frequently Asked Questions
Why Contractors Need a Construction-Specific Chart of Accounts
Setting up a chart of accounts for contractors is not the same job as building one for a retail shop or a marketing agency. A contractor chart of accounts is the numbered list of every account in your books, grouped by type, and it decides whether you can answer one question: did this job make money?
A standard chart lumps all labor into one line and has no place for retainage or work in progress. Contractors need labor split by job and cannot report accurately without both.
How a Trade-Ready Chart Differs From a Generic One
The core difference is job costing. A trade-ready chart lets you tag every cost to a specific project, so you see profit per job instead of one blurry yearly total.
The IRS guide to small business recordkeeping is a useful baseline for what records to keep, but it will not tell you how to structure job costs. That part is on you.
The Five Account Categories Every Contractor Chart Must Cover
Every account falls into one of five buckets: assets, liabilities, equity, income, and expenses. Get these wrong and your balance sheet stops balancing.
Here is what each category holds for a trade business:
- Assets: cash, accounts receivable, retainage receivable, vehicles, and equipment
- Liabilities: accounts payable, payroll liabilities, and loan balances
- Equity: owner's equity and retained earnings
Retainage receivable deserves its own line. Money held back by a general contractor is still yours, but it is not cash yet, and mixing it with regular receivables hides how much you are owed later.
Contractor Job Costing Accounts: Separating Direct Costs From Overhead
Direct costs belong to a job. Overhead belongs to the business. That split is the backbone of contractor job costing accounts, and it is where most charts fall apart.
Direct costs include:
- Labor costs for crews on that job
- Materials and supplier invoices
- Subcontractor costs
Overhead covers rent, office payroll, insurance, truck payments, and software. These indirect costs keep the doors open but do not attach to one job.
For a deeper walkthrough of tracking these costs month to month, our guide on 7 steps to track job costing for trades lays out the full process. Once the chart is live, read tracking material overruns and project margins to catch cost creep before it eats your profit.
A Construction Chart of Accounts Template With Real Account Numbers
A construction chart of accounts template works best when the numbering itself tells you something. Use ranges: 1000s for assets, 2000s for liabilities, 3000s for equity, 4000s for income, 5000s for direct costs, and 6000s to 8000s for overhead.
The sample below is a ready-to-adapt starter chart. Copy it into a spreadsheet, add a cost-code column if you use one, and delete any line your business does not use.
| Number | Account Name | Type | Notes |
|---|---|---|---|
| 1010 | Checking Account | Asset | Operating account |
| 1020 | Payroll Checking | Asset | Separate from operating |
| 1200 | Accounts Receivable | Asset | Standard progress invoices |
| 1250 | Retainage Receivable | Asset | Held-back amounts, tracked by job |
| 1300 | Work in Progress | Asset | Costs incurred not yet billed |
| 1500 | Vehicles | Asset | Trucks and vans |
| 1510 | Accumulated Depreciation, Vehicles | Asset | Contra-asset |
| 1600 | Equipment and Tools | Asset | Major equipment only |
| 2010 | Accounts Payable | Liability | Supplier and sub bills |
| 2100 | Payroll Liabilities | Liability | Taxes and withholdings |
| 2200 | Sales Tax Payable | Liability | If you collect sales tax |
| 2300 | Notes Payable, Equipment | Liability | Loan balances |
| 2400 | Billings in Excess of Costs | Liability | Overbilling on a job |
| 3010 | Owner's Equity | Equity | Capital contributions |
| 3100 | Retained Earnings | Equity | Prior-year close |
| 4010 | Construction Income, Installs | Revenue | By division if needed |
| 4020 | Construction Income, Service | Revenue | Service calls and repairs |
| 4030 | Change Order Income | Revenue | Approved change orders |
| 5010 | Direct Labor | Direct cost | Tagged to jobs |
| 5020 | Materials | Direct cost | Tagged to jobs |
| 5030 | Subcontractors | Direct cost | Tagged to jobs |
| 5040 | Equipment Costs, Job | Direct cost | Rentals and fuel on job |
| 5050 | Permits and Fees | Direct cost | Job-specific |
| 6010 | Rent | Overhead | Shop or office |
| 6020 | Insurance | Overhead | General liability |
| 6030 | Office Payroll | Overhead | Non-job labor |
| 6040 | Truck and Vehicle Expense | Overhead | Fuel, repairs, insurance |
| 6050 | Software and Subscriptions | Overhead | Field and office tools |
| 6060 | Advertising and Marketing | Overhead | Lead generation |
| 6070 | Professional Fees | Overhead | Accountant and attorney |
Two lines do the heavy lifting for contractors. Retainage Receivable (1250) keeps held-back money visible as an asset instead of burying it in regular receivables. Work in Progress (1300) and Billings in Excess of Costs (2400) let you see whether a job is overbilled or underbilled at any point, the foundation of a work-in-progress schedule. Skip those three accounts and your job costing will look fine month to month and still misstate profit at year end.
Adapting the Template by Trade and Business Model
A single template does not fit every contractor. Adjust the chart to how you actually earn revenue:
- General contractors: add a subcontractor cost account per trade (framing, electrical, plumbing, HVAC) and a separate Change Order Income line. GCs also need a retainage payable account on the liability side because they hold money back from their subs.
- Specialty trades (plumbing, HVAC, electrical): split income between service and install, and split direct labor between service technicians and install crews. Service work usually needs its own materials account for truck stock and consumables.
- Remodelers: add a design and selections account, a permits account, and an allowances account so client allowances do not get confused with actual costs.
Start lean and add accounts only when a report you actually use needs the detail.
Watch out: adding an account for every supplier or job type creates a chart nobody can classify consistently, and duplicate accounts make job costing unreliable.
Setting Up a Chart of Accounts for Contractors: Example Setup and Migration Steps

Here is a sequence for setting up a chart of accounts for contractors, from a messy file to a clean one.
- List your income streams. Split by service line, such as service calls versus installs.
- List your direct cost types. Labor, materials, subs, and equipment.
- Map your overhead. Every recurring bill gets a home.
- Assign number ranges. Follow the 1000-to-8000 pattern above.
- Build the new chart in a blank file. Do not edit the old one yet.
- Map old accounts to new ones. One line per old account.
- Import historical balances. Match the opening balance sheet to your last closed period.
- Run a test month. Compare reports before and after.
Watch out: migrating mid-year without tying opening balances to a closed period creates a balance sheet that never reconciles. Do the cutover at a month end.
QuickBooks Chart of Accounts for Contractors: Setup Tips and Limits
A QuickBooks chart of accounts for contractors is a solid starting point, but the default setup is built for general business, not trades. You will need to add job cost accounts, retainage, and work in progress lines yourself.
Setup Sequence in QuickBooks Online
- Turn on the tracking you need first. Go to Settings, then Advanced, and enable Classes and Locations. Classes are the usual way to tag jobs or divisions; Locations work for separate crews or service areas. Decide which one you will use before you build accounts, because switching later means re-tagging transactions.
- Build the chart in the Chart of Accounts screen. Use the New button and set the Account Type and Detail Type carefully. Detail Type drives which reports the account appears on, so a direct cost account should be set up as a Cost of Goods Sold type, not an Expense type, or it will land in the wrong section of your P&L.
- Create sub-accounts instead of new top-level accounts. Materials can have sub-accounts for lumber, fixtures, and consumables. Sub-accounts roll up to the parent on reports, which keeps the chart readable.
- Set opening balances at a month end. Enter opening balances against a closed period so the balance sheet ties to your last reviewed statement. Do not migrate mid-month.
- Run a test month before you commit. Enter one month of transactions in the new file, run a P&L by class and a balance sheet, and compare them to the old file. Fix mapping errors before you stop using the old system.
Where QuickBooks Stops and You Have to Take Over
The limit is reporting, not data entry. QuickBooks can track job costs by class, but work in progress, percentage of completion, overbilling versus underbilling, and retainage aging need manual schedules or a bookkeeper who knows where to look.
Transaction classification also drifts fast when nobody reviews it. A bookkeeper or office manager should review uncategorized transactions weekly, not at year end.
Keeping the Chart Under Control as You Grow
A chart built once and never touched again stops being useful within a year or two. Put a few rules in place:
- One owner for account changes. Decide who can add, rename, or inactivate accounts. In most small trade businesses that is the bookkeeper or the office manager, not every estimator.
- Inactivate, do not delete. QuickBooks will not let you delete an account with transactions, and inactivating keeps history intact. Merge duplicates by renaming and inactivating the redundant account.
- Review at year end. Walk the chart with your accountant before tax season, retire accounts you no longer use, and add lines for new service lines or divisions.
Watch out: letting multiple people add accounts without a rule is the most common way a clean chart turns into a list of near-duplicates that nobody can report from.
Common Chart of Accounts Mistakes Contractors Make
The most common mistake is dumping every cost into one expense account and hoping the accountant sorts it out in April. That kills job costing and hides your profit margin.
Other frequent errors:
- Mixing personal and business spending in one account
- No separate line for change orders
- Skipping retainage entirely
A chart built once and never touched again is a common mistake. Your business changes, and the chart should change with it. Review it at year end, every year.
Hand Off Your Chart of Accounts to a Bookkeeper Who Knows Trades
A clean chart is the starting line, not the finish. Someone has to classify every transaction, reconcile accounts, and close the books on a schedule, the part most contractors run out of hours for.
Checkpoint Bookkeeping handles this work for home service businesses and trades. If you are weighing the cost, our article on why to hire a dedicated bookkeeper for trades covers what changes when you stop doing it yourself. You can also see our simple, flat-rate pricing before you decide, or book a call today for a free 15-minute consultation.
Your chart of accounts decides whether your books tell you the truth about each job. Build it once with job costs, retainage, and overhead in the right places, and every report after that gets easier.
Frequently Asked Questions
Can you provide an example chart of accounts for a construction company?
A working example uses numbered ranges: 1000-1999 for assets (1000 Operating Checking, 1200 Accounts Receivable, 1250 Retainage Receivable), 2000-2999 for liabilities (2000 Accounts Payable, 2100 Payroll Liabilities), 3000-3999 for equity, 4000-4999 for construction income, and 5000-6999 for costs. Within the 5000 range, split direct job costs (labor, materials, subcontractors, equipment) from 6000-series overhead like rent, insurance, and office payroll. This structure feeds your income statement, balance sheet, and job costing reports without rework.
What accounts should a contractor include for job costs?
At minimum, create separate accounts for field labor, materials, subcontractor costs, equipment rental, and permits or fees. Each should sit under a direct costs parent account so you can subtotal them per job. Add cost codes or class tracking so every transaction ties to a project. That separation is what makes contractor job costing accounts useful: you can compare budgeted versus actual costs on each job and see gross profit by project rather than guessing from a bank balance.
How many accounts should a contractor's chart of accounts have?
Most small trade businesses do best with a lean chart. Too few accounts can leave out the detail needed for job costing and tax reporting; too many can make it hard to know where transactions belong. Start lean, then add accounts only when a real reporting need appears. Review the list once a year and deactivate anything unused. A lean account structure is easier to maintain and produces cleaner financial reporting.
Does an LLC need a balance sheet?
Yes, even a single-member LLC benefits from a balance sheet. It shows assets like cash, accounts receivable, and retainage receivable against liabilities such as accounts payable and payroll liabilities, plus equity. Lenders and sureties often ask for it, and it catches problems an income statement hides, such as a profitable year with no cash. Pair it with work in progress reporting so overbilling and underbilling on open jobs stay visible.